Model SL-P1082A. 45 × 30.5 × 13.5 cm; approx. 18 L before compression; 0.15 kg. TPU-laminated nylon, high-frequency welded; waterproof zipper. Pump built into valve; USB-C charging; 1,500 mAh lithium battery; approx. 15 s per compression; approx. 90 compressions per charge; screw cap with gasket. Rain and splash resistant, not submersible. Black; custom colours. Colour box with USB-C cable; 40 pcs per carton; UN38.3 and MSDS. MOQ 300 pcs; samples 7–15 days; production 25–45 days by quantity. Factories in Guangdong, China and Ho Chi Minh City, Vietnam.
Travel compression bag with a USB-C rechargeable pump built into the valve. 45 × 30.5 × 13.5 cm, 0.15 kg, waterproof zipper, welded TPU-laminated body. Compresses clothing to about half its volume in seconds, no hand pump needed.
| Item | Metric | Imperial |
|---|---|---|
| External dimensions (L × W × H), filled | 45 × 30.5 × 13.5 cm | 17.7 × 12 × 5.3 in |
| Capacity before compression | approx. 18 L | approx. 1,100 cu in |
| Thickness after compression | approx. 5–7 cm (depends on contents) | 2–2.8 in |
| Bag weight | 0.15 kg | 5.3 oz |
| Typical load | 4–6 T-shirts, 2 pairs of trousers, underwear and socks; or 1 down jacket and 2 fleeces | |
| Item | Specification |
|---|---|
| Pump location | Built into the screw-cap valve |
| Charging port | USB-C, inside the valve under the cap |
| Battery | 1,500 mAh lithium, built in |
| Charging time | approx. 2 hours |
| Compression time per bag | approx. 15 seconds |
| Compressions per charge | approx. 90 |
| Suction | approx. 4,000 Pa |
| Valve seal | Screw cap with gasket, tethered |
Custom colours are Pantone matched on the body. MOQ 300 pcs per colour.

The pump sits inside the valve housing, so there is no separate hand pump or electric pump to pack. Unscrew the cap, switch on, and air is drawn out in about 15 seconds.

The USB-C port sits under the valve cap. Charge from a phone charger, power bank or laptop in about two hours; one charge covers around 90 compressions.

A waterproof zipper runs across the long side, so the bag opens wide and packs flat like a packing cube. The coated zipper also seals well enough to hold the compressed state.

After compression, the bag becomes a flat, firm block about 5–7 cm thick that stacks neatly in a suitcase or backpack. Side loops make it easy to pull out.

Fold or roll clothes and lay them flat. Do not overfill above the zipper line.

Run the zipper to the end stop. Any gap lets air back in.

Unscrew the valve cap and switch on the pump. Hold the bag flat until it stops shrinking.

Switch off and screw the cap on firmly to hold the vacuum.
| Part | Material / specification | Note |
|---|---|---|
| Body | TPU-laminated nylon | High-frequency welded edges |
| Zipper | Waterproof coated zipper | Full length |
| Valve | Moulded housing, welded flange | Screw cap with gasket |
| Pump | Micro motor and fan | Inside valve housing |
| Battery | 1,500 mAh lithium | Built in |
| Charging port | USB-C | Under valve cap |
| Side loops | Polyester webbing | Both ends |
| Accessory | Standard / optional | Note |
|---|---|---|
| USB-C charging cable | Standard | — |
| Instruction card | Standard | — |
| Storage pouch | Optional | For the empty bag |
| Multi-size sets (S / M / L) | Optional | See SL-P1082 sizes |
| Method | Position | Max colours | Print area | Extra lead time |
|---|---|---|---|---|
| Screen print | Front, above zipper | 1–2 spot colours | up to 20 × 6 cm | +3 days |
| Heat transfer | Front | Full colour | up to 20 × 6 cm | +3 days |
| Logo on valve cap | Valve cap | 1 colour, debossed or printed | up to 3 cm diameter | +10 days |
| Item | Standard | Optional |
|---|---|---|
| Unit pack | Colour box with cable and instruction card | Custom printed box |
| Pieces per carton | 40 pcs | To customer requirement |
| Carton size | 55 × 40 × 40 cm | — |
| Gross weight per carton | approx. 12 kg | — |
| Shipping note | Contains lithium battery; shipped with UN38.3 and MSDS | — |
| Order quantity | Production time | Note |
|---|---|---|
| Sample (1–5 pcs) | 7–15 days | Standard colour with your logo |
| 300–500 pcs | 25 days | After sample approval |
| 501–1,000 pcs | 30 days | After sample approval |
| 1,001–3,000 pcs | 35 days | After sample approval |
| 3,001–10,000 pcs | 45 days | Split shipments available |
| Over 10,000 pcs | To be scheduled | — |
| Test | Method | Requirement / result |
|---|---|---|
| Vacuum hold | Unboxing → vacuum extraction → 24-hour static rest → air-leak determination | No visible re-inflation after 24 h |
| Pump performance | Time to compress a standard clothing load | approx. 15 seconds |
| Battery cycle | Compressions per full charge | approx. 90 |
| Zipper durability | Open–close fatigue test | 3,000 cycles |
| Weld bond strength | Seam peel and tensile test | Fabric fails before the weld |
| Valve cap seal | Repeated open–close and leak check | Seal intact |
| Water resistance | Rain and splash test, zipper and cap closed | No water ingress |
Production inspection at IQC, IPQC and OQC. Third-party inspection by SGS or QIMA on request.
| Report / certificate | Scope | Issued by | |
|---|---|---|---|
| UN38.3 | Lithium battery transport | [Lab] |
|
| MSDS | Lithium battery | [Lab] |
|
| CE / FCC | Pump electronics | [Lab] | |
| RoHS | Electronics and materials | [Lab] | |
| REACH SVHC | Body fabric |
[Lab] |
Keep the valve cap closed when not pumping so dust and lint do not reach the fan. Wipe the bag clean with a damp cloth; do not wash or submerge it, as the pump and battery are built in. Recharge every few months if stored unused.
Almost always the zipper is not fully closed to its end stop, or the valve cap is loose or has lint on the gasket. Close the zipper completely, wipe the gasket and screw the cap on firmly.
No. It reduces volume, not weight. Packing more into the same suitcase can push it over the airline weight limit, so weigh your bag before you fly.
The built-in battery is small and well under 100 Wh, which most airlines allow in cabin bags. Rules vary by airline and country, so check before travel. Keep the pump switched off in transit.
About 90 compressions per full charge, enough for a long trip with daily repacking. It recharges in about two hours over USB-C.
Compression causes some creasing. Rolling shirts and placing them flat reduces it. For formal wear, compress lightly by stopping the pump early.
Yes for travel. For storage longer than a few weeks, release the vacuum so the down can recover its loft.
Do not overfill above the zipper line. Press the contents down with one hand while pulling the slider with the other; never force the slider over trapped fabric.
It resists rain and splashes with the zipper and cap closed. It contains a battery and pump, so it must not be submerged or washed.
Send quantity, colour, logo artwork and packaging requirements. Quotation and sample schedule within one working day.
Email info@sealock.com.hk
Vacuum Compression Bag for Travel
Vacuum Compression Bag With Built In Pump
Vacuum Compression Bag with Hand Pump
Waterproof Travel Compression Bag – 49.5 × 29 × 12 cm with Clear Window and One-Way Air Valve, SL-P1165
Waterproof Compression Packing Cube – 34.5 × 36 × 14 cm with Air Valve and Clear Window, SL-P1166