Model SL-P1165. 49.5 × 29 × 12 cm (L × H × W); approx. 15 L; approx. 0.2 kg. TPU-coated nylon, high-frequency welded; clear TPU window along the top edge; waterproof zipper with cover flap; one-way purge valve with screw cap; welded pull tabs. Volume reduction up to about 50%; 24 h air-leak hold test. Rain and splash resistant, not submersible. Black standard; custom colours and logo printing. Optional hand pump. MOQ 300 pcs; samples 7–15 days; production 25–45 days by quantity. Factories in Guangdong, China and Ho Chi Minh City, Vietnam.
Welded TPU compression bag for clothes and bulky layers: 49.5 × 29 × 12 cm, about 15 L of packing space, a full-length clear window along the top edge, a waterproof zipper and a one-way purge valve that pushes air out and keeps it out.
| Item | Metric | Imperial |
|---|---|---|
| Outer dimensions (L × H × W) | 49.5 × 29 × 12 cm | 19.5 × 11.4 × 4.7 in |
| Packing capacity | approx. 15 L | approx. 915 cu in |
| Window length | approx. 40 cm | approx. 15.7 in |
| Compressed thickness (clothing load) | approx. 6–8 cm | approx. 2.4–3.1 in |
| Typical load | 15–20 T-shirts, or 1 down jacket + 1 fleece + base layers | — |
| Weight | approx. 0.2 kg | approx. 0.44 lb |
| Fits luggage | Carry-on suitcases from 55 × 40 × 20 cm | 22 × 16 × 8 in |
Body colour Pantone matched on request; window stays clear. MOQ 300 pcs per colour.

Close the zipper, then press or roll the bag from the far end. Air leaves through the valve and cannot flow back in, so the load stays flat in the suitcase. A screw cap protects the valve from dust and sand.

A clear TPU strip runs along the top edge. With several bags in one case, you can tell which one holds the jackets and which holds the base layers without opening and losing the compression.

The opening closes with a waterproof zipper under a folded cover flap. It keeps rain, spilled drinks and wet ground away from the clothes inside and holds the vacuum after air is pressed out.

The 12 cm gusset takes a down jacket, fleece or a thin sleeping bag, not just folded shirts. After compression the bag lies flat at about half its packed height.

All seams are high-frequency welded, so there are no needle holes for air to creep back through. The matte TPU-coated nylon wipes clean and separates damp clothes from dry ones on the way home.

| Part | Material / specification | Note |
|---|---|---|
| Body | TPU-coated nylon, matte | High-frequency welded |
| Window | Clear TPU film | Welded into body |
| Closure | Waterproof zipper with cover flap | Full-width opening |
| Valve | One-way purge valve with screw cap | Grey |
| Pull tabs | Welded TPU tabs | Both top corners |
| Logo | Printed on front panel | Customizable |
| Accessory | Standard / optional | Note |
|---|---|---|
| One-way purge valve with cap | Standard | — |
| Hand pump | Optional | Fits the valve, for faster air removal |
| Storage pouch | Optional | Holds the hand pump |
| Multi-size set | Optional | Combine with S/M/L compression bags |
| Method | Position | Max colours | Print area | Extra lead time |
|---|---|---|---|---|
| Screen print | Front panel | 1–3 spot colours | up to 25 × 12 cm | +3 days |
| Heat transfer | Front panel | Full colour | up to 25 × 12 cm | +3 days |
| UV digital print | Front panel | Full colour | up to 30 × 15 cm | +5 days |
| Welded TPU patch | Front panel | 1–2 colours | up to 10 × 5 cm | +5 days |
| Printed size label | Next to window | 1 colour | up to 8 × 3 cm | +2 days |
| Item | Standard | Optional |
|---|---|---|
| Unit pack | Folded flat in PE polybag | Colour box, header card, or set of 3 sizes |
| Tags and labels | Barcode label, instruction insert | Branded hangtag |
| Pieces per carton | 100 pcs | To customer requirement |
| Carton size | 55 × 35 × 40 cm | — |
| Gross weight per carton | approx. 22 kg | — |
| Order quantity | Production time | Note |
|---|---|---|
| Sample (1–5 pcs) | 7–15 days | Standard colour with your logo |
| 300–500 pcs | 25 days | After sample approval |
| 501–1,000 pcs | 30 days | After sample approval |
| 1,001–3,000 pcs | 35 days | After sample approval |
| 3,001–10,000 pcs | 45 days | Split shipments available |
| Over 10,000 pcs | To be scheduled | China and Vietnam lines can run in parallel |
| Test | Method | Requirement / result |
|---|---|---|
| Air-leak test | Unboxing → vacuum extraction → 24-hour static rest → air-leak determination | No visible re-inflation after 24 h |
| Valve check | One-way flow test on every valve | Air out only, no back-flow |
| Water resistance | Heavy rain and water-jet test, zipper closed | Contents stay dry; not for submersion |
| Weld bond strength | Seam peel and tensile test | Fabric fails before the weld |
| Window bond | Peel test at window seam | No separation |
| Zipper durability | Open–close fatigue test | 3,000 cycles |
| Fold and cold-crack | Repeated folding at low temperature | No cracking of TPU or window |
Production inspection at IQC, IPQC and OQC. Third-party inspection by SGS or QIMA on request.
| Report / certificate | Scope | Issued by | Report No. |
|---|---|---|---|
| REACH SVHC | Body fabric, window film | [Lab] | [Report No.] |
| California Proposition 65 | Body, window, valve | [Lab] | [Report No.] |
| Phthalate-free test | TPU window film | [Lab] | [Report No.] |
| Design patent | SL-P1165 body | [Patent office] | [Patent No.] |
Wipe inside and out with a damp cloth and let the bag dry open before storing. Keep sand and lint off the zipper and valve seat. Do not store down or synthetic insulation compressed for weeks at a time; release the air between trips
The valve only lets air out. Each production batch is sampled with a 24-hour hold test after air removal. If the zipper is not run fully to the end stop, air can enter there, so close it completely before pressing.
No. Pressing or rolling the bag by hand removes the air through the one-way valve. A hand pump that fits the valve is available as an option for faster packing.
No. It saves space, not weight. Packing more clothes into the same suitcase can push it over the airline weight limit, so weigh the case before you fly.
Rolled or flat-folded clothes come out with light creases. Shirts and trousers that need to stay crisp are better packed in a separate folder; this bag suits knitwear, jackets, fleece and base layers.
Yes, for travel. Do not leave down compressed for weeks in storage; release the air when you arrive so the fill can recover its loft.
No. It keeps out rain and splashes, but the valve opening means it is not designed to go underwater. Use a roll-top dry bag for submersion.
Yes. The clear window runs along the top edge, so clothes stay visible when several flat bags are stacked in a suitcase.
At 49.5 × 29 cm it lies flat in most carry-on cases with an inside length of about 50 cm or more. Two compressed bags stack in a standard 55 × 40 × 20 cm case.
Send quantity, colour, logo artwork and packaging requirements. Quotation and sample schedule within one working day.
Email info@sealock.com.hk