Model SL-P1166. 34.5 × 36 × 14 cm (L × H × W); approx. 15 L; approx. 0.18 kg. TPU-coated nylon, high-frequency welded; full-width waterproof top zipper with folded gusset; one-way purge valve with screw cap; clear TPU window at front base. Volume reduction up to about 50%; 24 h air-leak hold test. Rain and splash resistant, not submersible. Black standard; custom colours and logo printing. Optional hand pump. MOQ 300 pcs; samples 7–15 days; production 25–45 days by quantity. Factories in Guangdong, China and Ho Chi Minh City, Vietnam.
Square welded TPU compression cube for backpacks, duffels and suitcases: 34.5 × 36 × 14 cm, about 15 L, a full-width waterproof top zipper, a one-way purge valve and a clear window at the front base.
| Item | Metric | Imperial |
|---|---|---|
| Outer dimensions (L × H × W) | 34.5 × 36 × 14 cm | 13.6 × 14.2 × 5.5 in |
| Packing capacity | approx. 15 L | approx. 915 cu in |
| Zipper opening | approx. 33 cm, full width | approx. 13 in |
| Compressed thickness (clothing load) | approx. 6–8 cm | approx. 2.4–3.1 in |
| Typical load | 15–20 T-shirts, or 1 down jacket + 1 fleece + base layers | — |
| Weight | approx. 0.18 kg | approx. 0.4 lb |
| Fits | Backpacks from 30 L, duffels, carry-on suitcases | — |
Body colour Pantone matched on request; window stays clear. MOQ 300 pcs per colour.

At 34.5 × 36 cm the cube stands upright in the main compartment of a 30 L-plus backpack or fills one end of a duffel. After compression it is about 6–8 cm thick, so two or three cubes stack side by side.

The zipper runs across the full top edge, so the cube opens wide for packing jackets and rolled clothes. A folded top gusset sits above the zipper and gives it room to close over a full load.

The valve sits low on the side panel. Close the zipper and press down from the top: air is pushed out at the bottom and cannot flow back in. A screw cap keeps sand and lint off the valve seat.

A clear TPU window across the lower front panel shows what is packed at the bottom, so you can tell cubes apart in a full backpack without breaking the compression.

Every seam, including the centre back seam, is high-frequency welded. With no needle holes, the vacuum holds and rain or a spilled drink stays outside.

Stand the cube up and fill it with rolled or folded clothes, heaviest at the bottom.

Fold the top gusset in and run the zipper to the end stop.

Open the valve cap and press down from the top or kneel on the cube.

Screw the valve cap on and slide the flat cube into your bag.
| Part | Material / specification | Note |
|---|---|---|
| Body | TPU-coated nylon, matte | High-frequency welded, centre back seam |
| Closure | Waterproof zipper, full width | Folded top gusset |
| Valve | One-way purge valve with screw cap | Side panel, near base |
| Window | Clear TPU film | Front base, welded in |
| Logo | Printed on front panel | Customizable |
| Accessory | Standard / optional | Note |
|---|---|---|
| One-way purge valve with cap | Standard | — |
| Hand pump | Optional | Fits the valve |
| Grab handle or carry loop | Optional | Welded to top edge |
| Set with SL-P1165 | Optional | Cube + flat bag set |
| Method | Position | Max colours | Print area | Extra lead time |
|---|---|---|---|---|
| Screen print | Front panel | 1–3 spot colours | up to 20 × 12 cm | +3 days |
| Heat transfer | Front panel | Full colour | up to 20 × 12 cm | +3 days |
| UV digital print | Front or back panel | Full colour | up to 28 × 20 cm | +5 days |
| Welded TPU patch | Front panel | 1–2 colours | up to 10 × 5 cm | +5 days |
| Printed content label | Above window | 1 colour | up to 8 × 3 cm | +2 days |
| Item | Standard | Optional |
|---|---|---|
| Unit pack | Folded flat in PE polybag | Colour box, header card, or mixed set |
| Tags and labels | Barcode label, instruction insert | Branded hangtag |
| Pieces per carton | 100 pcs | To customer requirement |
| Carton size | 45 × 38 × 40 cm | — |
| Gross weight per carton | approx. 20 kg | — |
| Order quantity | Production time | Note |
|---|---|---|
| Sample (1–5 pcs) | 7–15 days | Standard colour with your logo |
| 300–500 pcs | 25 days | After sample approval |
| 501–1,000 pcs | 30 days | After sample approval |
| 1,001–3,000 pcs | 35 days | After sample approval |
| 3,001–10,000 pcs | 45 days | Split shipments available |
| Over 10,000 pcs | To be scheduled | China and Vietnam lines can run in parallel |
| Test | Method | Requirement / result |
|---|---|---|
| Air-leak test | Unboxing → vacuum extraction → 24-hour static rest → air-leak determination | No visible re-inflation after 24 h |
| Valve check | One-way flow test on every valve | Air out only, no back-flow |
| Water resistance | Heavy rain and water-jet test, zipper closed | Contents stay dry; not for submersion |
| Weld bond strength | Seam peel and tensile test | Fabric fails before the weld |
| Window bond | Peel test at window seam | No separation |
| Zipper durability | Open–close fatigue test | 3,000 cycles |
| Compression load | Body weight applied on packed cube, valve open | No seam or valve failure |
Production inspection at IQC, IPQC and OQC. Third-party inspection by SGS or QIMA on request.
| Report / certificate | Scope | Issued by |
|
|---|---|---|---|
| REACH SVHC | Body fabric, window film | [Lab] |
|
| California Proposition 65 | Body, window, valve | [Lab] |
|
| Phthalate-free test | TPU window film | [Lab] |
|
| Design patent | SL-P1166 body |
[Patent office] |
Wipe inside and out with a damp cloth and dry with the zipper open before storing. Keep the zipper and valve seat free of sand and lint. Release the air from down or synthetic insulation between trips rather than storing it compressed.
Same volume, different shape. SL-P1165 is long and flat for lying in a suitcase. SL-P1166 is square, 34.5 × 36 cm, and stands upright in a backpack or the end of a duffel.
Compressed, it is about 34.5 × 36 × 7 cm and fits the main compartment of most backpacks from 30 L. In a 20 L daypack it fits only partly filled.
You press down from the top when the cube stands on the floor or on a bed. Air moves downward and out through the low valve, and the clothes do not block it.
Not if the zipper is closed to the end stop and the cap is on. The valve lets air out only, and production is sampled with a 24-hour hold test after air removal.
No. It saves space only. A backpack packed with compressed clothing weighs the same as before, so check carry-on weight limits.
Yes, for the trip home. The welded body keeps moisture away from dry clothes. Empty and air it within a day or two to avoid odour and mildew.
No. It keeps out rain and splashes, but the valve opening means it is not designed for submersion. Use a roll-top dry bag for kayaking or swimming.
Open the valve cap first to let air back in, then unzip. Opening the zipper under vacuum puts strain on the teeth.
Send quantity, colour, logo artwork and packaging requirements. Quotation and sample schedule within one working day.
Email info@sealock.com.hk
Waterproof Travel Compression Bag – 49.5 × 29 × 12 cm with Clear Window and One-Way Air Valve, SL-P1165
USB-C Rechargeable Compression Bag – Electric Vacuum Packing Cube with Built-In Valve Pump, SL-P1082A
Vacuum Compression Bag with Hand Pump
Vacuum Compression Bag With Built In Pump
Vacuum Compression Bag for Travel