Insights

New Products

Insights

We are glad to share with you about the results of our work, company news, and give you timely developments and personnel appointment and removal conditions.

IPX8 Waterproof Backpack Production Process
Sealock is an IPX8 waterproof backpack manufacturer and OEM supplier. Reaching IPX8 on a phone pouch is a precision problem on a small sealed volume. Reaching it on a 65-litre load-bearing backpack is a different discipline entirely: metres of seam instead of centimetres, a wide opening that has to seal evenly across its whole width, a body that flexes under load while submerged, and enough trapped air to put real pressure on the closure from the inside. This guide covers how an IPX8 pack is actually built, and the engineering numbers behind the closure that makes it possible.
2026-09-09
Read More
Roll Top Waterproof Backpack Manufacturing Guide
Sealock is a roll-top waterproof backpack manufacturer and OEM supplier. On a dry sack, a roll-top is the simplest closure in outdoor gear — a round tube mouth folded down and clipped. On a backpack it is one of the most demanding components to build, because the opening is wide and shaped, it has to close cleanly against a harness and a frame, and its corners are where almost every roll-top failure begins. This guide covers how the collar is actually manufactured, the hardware decisions behind it, and the specification details that separate a roll-top that seals from one that merely folds.
2026-09-08
Read More
Waterproof Backpack Capacity Guide for Buyers
Sealock is a waterproof backpack manufacturer and OEM supplier. Capacity looks like the simplest line in a specification and is one of the most misleading. A litre figure on a waterproof pack conceals three separate numbers: the volume as measured, the volume actually usable once the pack is sealed, and the weight a human can carry in it — and the third is the one that decides whether the product works. This guide covers how to specify capacity so the number on your listing means something to the customer.
2026-09-08
Read More
Waterproof Backpack Material Guide
Sealock is a waterproof backpack manufacturer and OEM supplier. Most material discussions in this category stop at the shell — TPU or PVC, which denier, what coating. That covers perhaps a third of the decision. A waterproof backpack is an assembly of eight or nine different materials, and there is a specific irony in how they fail: the shell keeps water out, while the webbing, foam and thread quietly soak it up. This guide covers the materials most briefs never mention, and why they decide how the pack feels after a wet season.
2026-09-03
Read More
Custom Waterproof Backpack Production Guide
Sealock is a custom waterproof backpack manufacturer and OEM supplier. There is a persistent assumption in this industry that a waterproof bag factory is a welding factory — that the whole product comes off a high-frequency press. For dry sacks that is close to true. For backpacks it is not. A waterproof backpack is a hybrid product: welded where it has to be sealed, and sewn where it has to carry. Both disciplines have to be in the same building, at the same standard, or the pack fails at one end or the other. This guide covers how the two processes divide the work, and what a buyer should specify for each.
2026-09-03
Read More
OEM Waterproof Backpack Supplier
Sealock is an OEM waterproof backpack supplier and manufacturer. Most waterproof backpack briefs specify capacity, material, closure and colour — and say nothing about the one variable that decides whether the customer keeps the pack: whether it fits their body. A backpack is the only waterproof product that has to be sized to a person, and fit is the leading cause of discomfort, poor load transfer and returns in the category. This guide covers the fit decisions an OEM buyer actually controls, and why they're harder — and more valuable — on a welded waterproof pack.
2026-09-02
Read More