Model SL-E1144. 32 × 14.5 × 45.5 cm (W × D × H); approx. 20 L plus approx. 2 L hip pack; 0.9 kg complete; load up to 10 kg. Heather TPU-laminated polyester, high-frequency welded with taped inside seams. U-shaped moulded waterproof main zipper; front pocket with waterproof zipper; detachable hip pack with waterproof zipper and padded waist belt. Internal organiser with laptop sleeve up to 15.6 in. Two welded TPU tabs with D-rings; TPU side ladder loops; hex air-mesh back panel with embroidered logo; padded shoulder straps; webbing top handle. IPX6, heavy rain, not submersible. Heather grey and sand standard; custom colours and logo. MOQ 300 pcs; samples 7–15 days; production 25–45 days by quantity. Factories in Guangdong, China and Ho Chi Minh City, Vietnam.
20 L welded TPU backpack, 32 × 14.5 × 45.5 cm, 0.9 kg, with a detachable waterproof hip pack on a padded waist belt. U-shaped waterproof zipper, internal organiser and laptop sleeve, two welded D-ring tabs, side ladder loops and a ventilated mesh back panel.
| Item | Metric | Imperial |
|---|---|---|
| Backpack (W × D × H) | 32 × 14.5 × 45.5 cm | 12.6 × 5.7 × 17.9 in |
| Main pack capacity | approx. 20 L | approx. 1,220 cu in |
| Hip pack (W × D × H) | approx. 26 × 8 × 14 cm | approx. 10.2 × 3.1 × 5.5 in |
| Hip pack capacity | approx. 2 L | approx. 120 cu in |
| Laptop sleeve | Up to 15.6 in, loaded upright | — |
| Side bottle pocket | Fits bottles up to approx. 7.5 cm diameter | up to approx. 3 in |
| Waist belt | 70–120 cm, adjustable | 28–47 in |
| Weight, complete | 0.9 kg | 2 lb |
| Recommended load | up to 10 kg | up to 22 lb |
Shell, webbing, binding and welded tabs Pantone matched on request. MOQ 300 pcs per colour.

A grey hip pack with its own waterproof zipper sits on a padded waist belt at the base of the pack. Wear it with the backpack, or unclip it and wear it alone for a short walk, a fishing session or a day in town with phone, keys and wallet.

The heather TPU-laminated shell is high-frequency welded, with welded tape over every inside seam and no stitch holes to leak through. A U-shaped moulded waterproof zipper opens the top and front for wide access to the main compartment.

The back wall carries a sleeve for a laptop up to 15.6 in, loaded upright, plus a zip pocket and slip pockets for cables, a power bank and documents.

Two welded tabs with D-rings sit high on the front for a light, sunglasses retainer or carabiner. TPU ladder loops on the left side take a rod tube, tripod or rolled jacket under a strap, and a stretch mesh pocket on the right holds a water bottle outside the dry compartment.

A hex air-mesh back panel and padded shoulder straps keep air moving between your back and the welded shell. The straps buckle at the base and adjust for length; a webbing handle sits on top.

Slide the laptop in upright, then pack clothes or kit and close the U-zipper to the end stop.

Put phone, keys and wallet in the hip pack for quick reach.

Put the pack on, buckle the waist belt and tighten the shoulder straps.

Leave the backpack at camp or in the car and wear the hip pack alone.
| Part | Material / specification | Note |
|---|---|---|
| Shell | Heather TPU-laminated polyester | Stiff hand, high-frequency welded |
| Inside seams | Welded seam tape | No stitch holes |
| Main zipper | Moulded waterproof zipper, U-shaped | — |
| Front pocket zipper | Waterproof zipper with cord puller | — |
| Hip pack | Same TPU shell, waterproof zipper | Detachable |
| Organiser panel | Polyester and mesh | Laptop sleeve, zip pocket, slip pockets |
| Front tabs | Welded TPU tabs with metal D-rings | 2 pcs |
| Side loops | TPU ladder loops | — |
| Bottle pocket | Stretch mesh | Right side |
| Back panel | Hex air mesh over foam | Embroidered logo |
| Shoulder straps and waist belt | Foam-padded, nylon webbing, plastic buckles | Adjustable |
| Accessory | Standard / optional | Note |
|---|---|---|
| Detachable hip pack with waist belt | Standard | — |
| Internal organiser and laptop sleeve | Standard | — |
| Sternum strap | Optional | Sliding on strap rail |
| Airtight zipper upgrade | Optional | Main compartment |
| Rod or tripod holder strap | Optional | Fits side ladder loops |
| Reflective tabs | Optional | Replace front tabs |
| Method | Position | Max colours | Print area | Extra lead time |
|---|---|---|---|---|
| Screen print | Front pocket or upper front | 1–3 spot colours | up to 15 × 10 cm | +3 days |
| Heat transfer | Front pocket or hip pack | Full colour | up to 15 × 10 cm | +3 days |
| Embroidery | Back panel | up to 6 thread colours | up to 5 × 20 cm | +5 days |
| Welded TPU patch | Front pocket or hip pack | 1–2 colours | up to 10 × 5 cm | +5 days |
| Debossed logo on tabs | Front D-ring tabs | — | up to 3 × 5 cm | +10 days (mould) |
| Item | Standard | Optional |
|---|---|---|
| Unit pack | PE polybag, hip pack attached, paper stuffing | Colour box |
| Tags and labels | Barcode label, care label | Branded hangtag |
| Pieces per carton | 10 pcs | To customer requirement |
| Carton size | 60 × 45 × 50 cm | — |
| Gross weight per carton | approx. 11 kg | — |
| Order quantity | Production time | Note |
|---|---|---|
| Sample (1–5 pcs) | 7–15 days | Standard colour with your logo |
| 300–500 pcs | 25 days | After sample approval |
| 501–1,000 pcs | 30 days | After sample approval |
| 1,001–3,000 pcs | 35 days | After sample approval |
| 3,001–10,000 pcs | 45 days | Split shipments available |
| Over 10,000 pcs | To be scheduled | China and Vietnam lines can run in parallel |
| Test | Method | Requirement / result |
|---|---|---|
| Water rating | Heavy rain and water-jet test, all zippers closed | IPX6 – contents stay dry |
| Weld bond strength | Seam peel and tensile test | Fabric fails before the weld |
| Strap load test | Loaded pack lifted by shoulder straps and handle | 1,500 cycles at 10 kg, no failure |
| Waist belt and buckle | Pull test on belt and hip pack connection | No slip or breakage |
| Zipper durability | Open–close fatigue test | 3,000 cycles |
| D-ring tab strength | Pull test on welded tabs | No peel-off |
| Abrasion | Martindale on shell fabric | No coating break-through |
| Cold flex | Repeated folding at low temperature | No cracking of TPU |
Production inspection at IQC, IPQC and OQC. Third-party inspection by SGS or QIMA on request.
| Report / certificate | Scope | Issued by | Report No. |
|---|---|---|---|
| REACH SVHC | Shell fabric, webbing, mesh | [Lab] | [Report No.] |
| California Proposition 65 | Shell, TPU tabs, zippers | [Lab] | [Report No.] |
| Phthalate-free test | TPU lamination | [Lab] | [Report No.] |
| Design patent | SL-E1144 body | [Patent office] | [Patent No.] |
Rinse with fresh water after use near salt water and wipe with mild soap; do not machine wash. Dry with the zippers open, out of direct sun. Clean the zipper teeth and apply zipper lubricant a few times a year.
Yes. Unclip it from the backpack and wear it on its waist belt as a hip pack, for a walk to the water or around town without the full pack.
It uses the same welded TPU shell and a waterproof zipper, so it keeps out rain and spray. Like the backpack, it is not for submersion.
The shell is laminated with TPU so it can be welded instead of sewn. The lamination makes it stiffer than a sewn nylon pack; it softens a little with use and helps the pack keep its shape when half full.
No. Brief splashes are fine, but the main zipper is a waterproof zipper, not airtight, so water can get in under pressure. An airtight zipper upgrade is available for custom orders.
Yes, loaded upright in the back-wall sleeve. The sleeve is lightly padded; use a laptop sleeve if you carry the pack on rough trails.
Less than flat light colours. The mixed weave hides dust and water marks; mud and fish slime wipe off the TPU surface with a damp cloth.
New TPU can have a light smell for the first few days. Leave the pack open in a ventilated room; the smell fades without washing.
The two front D-rings take a carabiner, light or sunglasses retainer. The side ladder loops take a rod tube, tripod or rolled jacket under a strap.
Yes, a stretch mesh pocket on the right side. It sits outside the waterproof compartment, so a wet or sweating bottle never touches the gear inside.
Send quantity, colour, logo artwork and packaging requirements. Quotation and sample schedule within one working day.
Email info@sealock.com.hk