Model SL-E1120. 33 × 16 × 48.5 cm (L × W × H); approx. 22 L; 0.65 kg; load up to 10 kg. Coated grid ripstop nylon, sewn and seam-taped. Laptop compartment for up to 15.6 in, loaded upright, YKK airtight zipper, 5 mm padded divider, floor raised 4.5 cm. Clamshell main compartment with zip pocket, slots and mesh pocket; vertical front pocket 12.5 × 38 × 9 cm; side-access back pocket 22 × 24.5 × 12 cm with grey plush lining; other zippers waterproof. S-curve padded straps, sternum strap, webbing top handle. IPX5, heavy rain, not submersible. Orange standard; custom colours and logo. MOQ 300 pcs; samples 7–15 days; production 25–45 days by quantity. Factories in Guangdong, China and Ho Chi Minh City, Vietnam.
22 L ripstop laptop backpack, 33 × 16 × 48.5 cm, 0.65 kg. The laptop compartment closes with a YKK airtight zipper and has a 5 mm padded divider and a raised floor; a clamshell main compartment, a 38 cm front zip pocket and a plush-lined back pocket hold the rest.
| Item | Metric | Imperial |
|---|---|---|
| Outer dimensions (L × W × H) | 33 × 16 × 48.5 cm | 13 × 6.3 × 19.1 in |
| Total capacity | approx. 22 L | approx. 1,340 cu in |
| Laptop compartment | Fits up to 15.6 in laptop (approx. 37 × 26 × 3 cm), loaded upright | up to 14.6 × 10.2 × 1.2 in |
| Laptop divider | 5 mm padded, floor raised 4.5 cm | 0.2 in / 1.8 in |
| Front zip pocket (W × H × D) | 12.5 × 38 × 9 cm | 4.9 × 15 × 3.5 in |
| Back plush pocket (W × L × max. H) | 22 × 24.5 × 12 cm | 8.7 × 9.6 × 4.7 in |
| Weight | 0.65 kg | 1.4 lb |
| Recommended load | up to 10 kg | up to 22 lb |
Shell, binding, webbing and zipper tape colours Pantone matched on request. MOQ 300 pcs per colour.

The laptop compartment sits against the back panel and opens from the top through a YKK airtight zipper, the same type used on dry bags. Rain running over the top of the pack does not seep in through the zipper teeth.

A 5 mm padded divider separates the laptop from the main load, and the laptop floor sits 4.5 cm above the bottom of the pack. When the bag is set down hard, the base takes the impact, not the corner of the laptop.

A waterproof zipper runs down both sides, so the main compartment opens flat like a suitcase. Inside: a zip pocket, pen and key slots, a mesh pocket and seam-taped walls.

The vertical front zip pocket is 12.5 × 38 × 9 cm, long enough for an umbrella, a charger and cable or a folded rain shell, kept apart from the laptop and clothes.

A side zipper on the back panel opens a 22 × 24.5 cm pocket lined with soft grey plush. It holds a phone, sunglasses or a tablet without scratching, and sits against your back where it cannot be opened in a crowd.

Open the top airtight zipper and slide the laptop in upright, hinge side down, behind the padded divider.

Pull the airtight zipper firmly to the end stop until it seats in the garage.

Open the clamshell, pack clothes and kit, and sort small items into the organiser.

Tighten the shoulder straps and clip the sternum strap at chest height.
| Part | Material / specification | Note |
|---|---|---|
| Shell | Coated grid ripstop nylon | Sewn, seam-taped |
| Lining | Polyester lining, black | Main compartment |
| Back pocket lining | Grey plush | Scratch protection |
| Laptop zipper | YKK airtight zipper | Top opening |
| Main and pocket zippers | Waterproof zippers | Clamshell, front, back |
| Laptop divider | 5 mm foam padding | Raised 4.5 cm floor |
| Shoulder straps | S-curve, foam-padded, black binding | Adjustable |
| Sternum strap | Adjustable on webbing | Quick-release buckle |
| Top handle | Nylon webbing | — |
| Logo | White print on front | Customizable |
| Accessory | Standard / optional | Note |
|---|---|---|
| Sternum strap | Standard | — |
| Internal organiser | Standard | Zip pocket, slots, mesh pocket |
| Reflective logo or strip | Optional | For night commuting |
| Luggage pass-through strap | Optional | On back panel |
| Side bottle pocket | Optional | Stretch mesh |
| Rain cover | Optional | Stored in base pocket |
| Method | Position | Max colours | Print area | Extra lead time |
|---|---|---|---|---|
| Screen print | Front panel | 1–3 spot colours | up to 10 × 15 cm | +3 days |
| Heat transfer | Front panel | Full colour | up to 10 × 15 cm | +3 days |
| Reflective print | Front panel | 1 colour | up to 10 × 15 cm | +3 days |
| Woven or rubber label | Front or shoulder strap | — | up to 6 × 3 cm | +7 days |
| Embroidery | Shoulder strap | up to 6 thread colours | up to 6 × 3 cm | +5 days |
| Item | Standard | Optional |
|---|---|---|
| Unit pack | PE polybag, paper stuffing | Colour box |
| Tags and labels | Barcode label, care label | Branded hangtag |
| Pieces per carton | 20 pcs | To customer requirement |
| Carton size | 60 × 50 × 45 cm | — |
| Gross weight per carton | approx. 15 kg | — |
| Order quantity | Production time | Note |
|---|---|---|
| Sample (1–5 pcs) | 7–15 days | Standard colour with your logo |
| 300–500 pcs | 25 days | After sample approval |
| 501–1,000 pcs | 30 days | After sample approval |
| 1,001–3,000 pcs | 35 days | After sample approval |
| 3,001–10,000 pcs | 45 days | Split shipments available |
| Over 10,000 pcs | To be scheduled | China and Vietnam lines can run in parallel |
| Test | Method | Requirement / result |
|---|---|---|
| Water rating | Heavy rain and water-jet test, all zippers closed | IPX5 – contents stay dry |
| Fabric hydrostatic head | Coated ripstop shell | ≥ 5,000 mm |
| Seam tape adhesion | Peel test after wash and flex | No lifting |
| Strap load test | Loaded pack lifted by shoulder straps and handle | 1,500 cycles at 10 kg, no failure |
| Zipper durability | Open–close fatigue test | 3,000 cycles |
| Tear strength | Ripstop tongue tear test | Tear stops at grid line |
| Abrasion | Martindale on shell fabric | No coating break-through |
| Colour fastness | Rubbing and light exposure | Grade 4 or above |
Production inspection at IQC, IPQC and OQC. Third-party inspection by SGS or QIMA on request.
| Report / certificate | Scope | Issued by |
|
|---|---|---|---|
| REACH SVHC | Shell fabric, lining, plush | [Lab] |
|
| California Proposition 65 | Shell, webbing, zippers | [Lab] |
|
| PFAS-free coating | Shell fabric | [Lab] |
|
| Design patent | SL-E1120 body | [Patent office] |
|
Wipe with a damp cloth and mild soap; do not machine wash or tumble dry, which can lift the seam tape. Keep the airtight zipper clean and apply zipper lubricant a few times a year so it stays easy to close.
Yes. The laptop goes in upright, so its 35–37 cm length runs along the 48.5 cm height of the pack and its 22–26 cm depth across the 33 cm width. Thin-bezel ultrabooks and standard 15.6 in gaming laptops up to about 3 cm thick both fit.
No. The airtight zipper stops rain from getting in through the opening, but the pack is sewn and seam-taped, not welded. It is rated for heavy rain, not submersion.
Airtight zippers seal with tight-fitting teeth, so they need more force than a normal zipper. Hold the bag with one hand and pull the slider straight along the track. Zipper lubricant makes it easier.
The laptop floor is raised 4.5 cm above the base, and a 5 mm padded divider separates it from the main load. A drop onto the base does not hit the laptop directly.
There is no outside bottle pocket on the standard version, to keep the sides clean in rain. A bottle fits in the front pocket or main compartment. A side mesh bottle pocket can be added for custom orders.
Items that scratch easily: a phone, sunglasses, a small tablet or a passport. It sits against your back, so it is hard for anyone else to open while you wear the pack.
Yes. The coated ripstop shell, taped seams and waterproof zippers keep out heavy rain. The orange shell is easy for drivers to see; a reflective logo can be added.
No. At 22 L and up to about 10 kg, shoulder straps and a sternum strap carry the load. A removable webbing waist strap is available for custom orders.
Send quantity, colour, logo artwork and packaging requirements. Quotation and sample schedule within one working day.
Email info@sealock.com.hk