Model SL-I047. 46 × 26 × 29 cm; inner approx. 43 × 23 × 26 cm; approx. 25 L; 30 cans without ice; approx. 2.1 kg; load up to 18 kg. TPU-laminated nylon shell, high-frequency welded; food-grade TPU liner; 25 mm closed-cell foam. Waterproof top zipper; IPX6, leakproof upright. Screw-in drain plug; front welded zip pocket; webbing lash points; end compression buckles; detachable padded shoulder strap; black base band. Ice approx. 36 h. Mist blue; custom colours. MOQ 300 pcs; samples 7–15 days; production 25–45 days by quantity. ISO 9001, BSCI, SMETA, Higg, GRS, SCAN. Factories in Guangdong, China and Ho Chi Minh City, Vietnam.
25 L soft cooler tote in welded TPU with a screw-in drain plug, food-grade TPU liner, waterproof top zipper, front zip pocket, webbing lash points, end compression buckles and detachable padded shoulder strap.
| Item | Metric | Imperial |
|---|---|---|
| External dimensions (L × W × H) | 46 × 26 × 29 cm | 18.1 × 10.2 × 11.4 in |
| Internal dimensions | approx. 43 × 23 × 26 cm | 16.9 × 9.1 × 10.2 in |
| Capacity | approx. 25 L | approx. 26 qt |
| Cans without ice | about 30 × 330 ml | — |
| Cans with ice | about 20 × 330 ml | — |
| Weight | approx. 2.1 kg | approx. 3.7 lb |
| Recommended load | up to 18 kg | up to 40 lb |
Shell, webbing, base band and liner are Pantone matched on request. MOQ 300 pcs per colour.

A drain plug at the base of the front panel lets melt-water out without tipping the cooler or taking the contents out. Unscrew, drain, screw back in.

The liner is food-grade TPU, high-frequency welded into one tub with no stitch holes. Melt-water stays inside and the liner wipes clean after fish, bait or food.

Below each handle anchor, a looped webbing panel takes carabiners, a bottle opener or tie-down straps for securing the cooler in a boat or truck bed.

A side-release buckle strap on each end pulls the top corners in, keeping the shape firm when the cooler is half full.

A welded zip pocket on the front holds keys and phone outside the cold compartment. The detachable shoulder strap has a padded section and clips to the handle anchors.
| Part | Material / specification | Note |
|---|---|---|
| Shell | TPU-laminated nylon | High-frequency welded |
| Liner | Food-grade TPU, single-piece welded | No stitch holes |
| Insulation | 25 mm closed-cell foam, all sides including lid | — |
| Main zipper | Waterproof coated zipper | Full length of top |
| Drain plug | Moulded screw-in plug with gasket | Base of front panel |
| Handles and strap | Polyester webbing | Padded shoulder section |
| Anchors | Moulded triangle anchors on welded patches | — |
| Lash points | Looped polyester webbing | Below each handle |
| Buckles | Side-release, acetal | End compression |
| Base | Black abrasion-resistant band | — |
| Accessory | Standard / optional | Note |
|---|---|---|
| Detachable padded shoulder strap | Standard | Adjustable |
| Drain plug | Standard | Screw-in |
| Front zip pocket | Standard | — |
| Airtight zipper upgrade | Optional | For IPX7, leakproof any way up |
| Bottle opener | Optional | Clips to lash point |
| Thicker insulation (30 mm) | Optional | Longer ice retention |
| Method | Position | Max colours | Print area | Extra lead time |
|---|---|---|---|---|
| Screen print | Front, between handles | 1–3 spot colours | up to 20 × 10 cm | +3 days |
| Heat transfer | Front | Full colour | up to 20 × 10 cm | +3 days |
| Welded TPU patch | Front | 1–2 colours | up to 12 × 6 cm | +5 days |
| Print on shoulder pad | Shoulder strap | 1–2 colours | up to 10 × 4 cm | +3 days |
| Item | Standard | Optional |
|---|---|---|
| Unit pack | PE polybag with suffocation warning | Colour box |
| Tags and labels | Barcode label, care label | Branded hangtag |
| Pieces per carton | 6 pcs | To customer requirement |
| Carton size | 60 × 48 × 50 cm | — |
| Gross weight per carton | approx. 12 kg | — |
| Order quantity | Production time | Note |
|---|---|---|
| Sample (1–5 pcs) | 7–15 days | Standard colour with your logo |
| 300–500 pcs | 25 days | After sample approval |
| 501–1,000 pcs | 30 days | After sample approval |
| 1,001–3,000 pcs | 35 days | After sample approval |
| 3,001–10,000 pcs | 45 days | Split shipments available |
| Over 10,000 pcs | To be scheduled | China and Vietnam lines can run in parallel |
| Test | Method | Requirement / result |
|---|---|---|
| Water rating | Heavy rain and water-jet test, zipper closed | IPX6 – no water ingress |
| Drain plug leak test | Filled with water, plug closed, upright and tilted | No seepage at plug |
| Liner leak test | Filled with water, standing | No seepage through welded liner |
| Handle load test | Loaded cooler lifted by handles and strap | 1,500 cycles at 18 kg, no failure |
| Zipper durability | Open–close fatigue test | 3,000 cycles |
| Weld bond strength | Seam peel and tensile test | Fabric fails before the weld |
| Ice retention | Packed with ice, closed, 25 °C ambient, out of sun | approx. 36 hours |
| Colour fastness | Rubbing, dry and wet | Grade 4 or above |
Production inspection at IQC, IPQC and OQC. Third-party inspection by SGS or QIMA on request.
| Report / certificate | Scope | Issued by |
|
|---|---|---|---|
| Food contact (FDA / LFGB) | TPU liner | [Lab] |
|
| REACH SVHC | Shell fabric | [Lab] |
|
| California Proposition 65 | Shell, liner, webbing | [Lab] |
|
| Design patent | SL-I047 body | [Patent office] |
|
Drain melt-water through the plug, wipe the liner with warm water and mild detergent, then leave the zipper open and the plug out until fully dry. Rinse sand and salt from the plug thread so it seals properly next time.
The plug screws into a gasketed fitting and every unit is leak-tested with water. Leaks usually come from a plug not screwed fully home or sand in the thread; rinse the thread and tighten by hand until it stops.
Set the cooler on the ground, tilt it slightly toward the plug, and unscrew it. The water runs out at the base, away from your feet if the plug faces downhill.
It is leakproof upright. The standard waterproof zipper is not airtight, so melt-water can seep out at the zipper if the cooler lies on its side. An airtight zipper upgrade makes it leakproof in any position.
About 36 hours in our tests at 25 °C, packed with ice, closed and out of the sun. Draining melt-water during the day helps the remaining ice last longer.
Yes. The liner is food-grade TPU with no stitched seams. Drain through the plug and rinse with fresh water after use so it does not hold odour.
Tighten the buckle straps on both ends. They pull the top corners in and keep the shape firm with a partial load.
Clipping a bottle opener or carabiner, and running tie-down straps through to secure the cooler in a boat or truck bed.
The strap has a padded section that spreads the load. For a full 18 kg load over long distances, carry it by both handles.
Send quantity, colour, logo artwork and packaging requirements. Quotation and sample schedule within one working day.
Email info@sealock.com.hk